Press on one of the following series to get more information

The Robusta slurry tankers, 7800 to 10,400 litres
The Robusta “Easy” tandem vacuum tanker wagons
The Robusta 150T and 180T slurry tankers
The Robusta 180 and 200 wheel housing slurry tankers
The single-axle Robusta slurry tanker 125E
The Robusta slurry tankers with variable track width, single-axle version
The Robusta slurry tankers with variable track width, tandem axle version
The Robusta 260 Tridem (3 axles) slurry tankers and the 340 Quattro (4 axles)
The Robusta 250, suitable for hook arm system, type Kameleon



The Robusta slurry tankers, 7800 to 10,400 litres
   Type:          

• Robusta 80
• Robusta 84WK
• Robusta 94WK
• Robusta 104W

This series of small pump tank wagons with a tank capacity ranging from 7,800 to 10,400 litres come standard with a galvanized body and underframe. Models 84WK, 94WK and 104WK have larger tyres and integrated wheel housings.

This series of slurry tankers is also available in a Perfecta vacuum tanker version. Go to the web page on Perfecta vacuum tanker wagons for more information.

Characteristics of the "standard” Robusta slurry tankers, 7800 to 10400 litres
    • Low drawbar, height adjustable
    • Galvanized body and underframe
    • Heavy-duty drawbar eye, fixed
    • Worm gear pump type 120 with 4 or 8 settings of the reduction gear unit for continuously adjustable distribution
    • Stone catcher
    • Wide-angle power take-off
    • Level indicator with sightglass on front panel
    • Mounting possibility for three-point linkage
    • Hydraulically controlled three-way valve 4”
    • 6” side connection with rapid coupling left front
    • Connecting flange for 6" connection on the right

Technical data

Type		Robusta 80	Robusta 84WK	Robusta 94WK	Robusta 104WK
Capacity	ltr	7.800	8.400	9.400	10.400
Body diameter	cm	160	170	180
Wheel track	cm	200
Tyre size	cm (hxb)	159x72	173x75
Axle type		unbraked	hydr. braked

The Robusta “Easy” tandem vacuum tanker wagons
   Type:         

• Robusta 84T
• Robusta 109T             

This “Easy” line of tandem tankers, particularly suitable for less solid types of soil, stands out from other tandem wagons for its simplicity, durability, and an explicit narrow base in combination with its special-designed tandem. The ideal position of the backward placed tandem guarantees minimum tractive effort with maximum head pressure.

As well as the Robusta model, the Easy line also comes in the Perfecta vacuum tanker wagon model. Go to the web page on Perfecta vacuum tanker wagons for more information.

Characteristics of the "standard” Robusta “Easy” vacuum slurry tanker
    • Varnished underframe with galvanized body
    • Low drawbar
    • Heavy-duty drawbar eye
    • Newly developed special oscillating tandem axle, 20 tons, track-following
    • Total tanker width well within three metres, even if 80 cm tyres have been fitted
    • Braking on 2 wheels
    • Wide-angle power take-off
    • Meyer worm gear pump type 120 with stone catcher
    • 4 or 8 settings of the reduction gear unit with coupling and shearing pin
    • Mounting possibility for three-point linkage
    • Hydraulically controlled three-way valve 4”
    • 6” side connection with rapid coupling left front
    • Hydraulically controlled 6" rear coupling
    • Connecting flange for 6" connection on the right

Technical data

Type		Robusta 84T	Robusta 109T
Capacity	ltr	8.400	10.900
Wheel track	cm	155
Load bearing capacity	ton	20

 
The Robusta 150T and 180T slurry tankers

The Robusta 150T and 180T come standard with a worm gear pump and a reduction gear unit. The underframe has been varnished; the tank has been varnished on the outside. There are many optional extras, so Schuitemaker will be able to meet all their customers’ requirements.

The Robusta 150T is also available as a Perfecta model. Go to the web page on Perfecta vacuum tanker wagons for more information.

Characteristics of the "standard” Robusta 150T and 180T
    • Parabolic sprung tandem
    • Track-following tandem: hydraulic braking on 4 wheels
    • Wide-angle power take-off
    • Meyer worm pump type 120
    • Factory-delivered 4 settings reduction gear unit with coupling
    • Equipped with level indicator and sight glass
    • Mounting possibility for three-point linkage
    • 6” suction opening with snap-on coupling at the left front side of the pump
    • Connecting flange for 6" connection on the right
    • Hydraulically controlled three-way valve 4”

Technical data

Type		Robusta 150T	Robusta 180T
Capacity	ltr	15.100	18.250
Wheel track	cm	160
Load bearing capacity of spring assembly	ton	24	32
Load bearing capacity of tandem	ton	24

The Robusta 180 and 200 wheel housing slurry tankers

The Robusta 180 and 200 come standard with a displacement pump. This tanker stands out from other vacuum tankers for its standard large wheel housings, allowing tyres up to 175 cm diameter to be fitted.

The Robusta 180 and 200 also come as a Perfecta vacuum tanker model. Go to the web page on Perfecta vacuum tanker wagons for more information

Characteristics of the "standard" Robusta 180 en 200 slurry tankers
    • Fitted with a Borger FL 1036 displacement pump industrial model with pushed-up rubber
    • 8 settings reduction gear unit
    • Large wheel housings for 30.5” Tyres
    • Hydraulically sprung tandem
    • Track following tandem
    • Hydraulic braking on 4 wheels
    • Wide-angle power take-off with slip coupling
    • Mounting possibility for three-point linkage
    • 6” side connections left and right front
    • 6” three-way valve, hydraulically controlled

Technical data

Type		Robusta 180	Robusta 200
Capacity	ltr	18.000	20.000
Wheel track	cm	195
Load bearing capacity	ton	30

 
The single-axle Robusta slurry tanker 125E

The Robusta 125E with a tank capacity of 12,500 litres comes standard with large wheel housings, allowing tyres up to 190 cm diameter to be fitted.

Characteristics of the "standard” Robusta 125E vacuum slurry tanker
    • Börger FL 1036 industrial model with pushed-up rubber rotor heads
    • Pump located on the left of the chassis for better access.
    • 8 settings reduction gear
    • Wide-angle power take-off
    • Hydraulically braked axle
    • Side connection left and right
    • 8" vertical shut-off valve between tank and body
    • 6” pressure pipe on mudguard
    • 6” three-way valve, hydraulically controlled
    • Three-point linkage with accumulator welded onto the frame.

Technikal Data

Type		Robusta 125E
Capacity	Wheel track	12.500
Wheel track	cm	190

The Robusta slurry tankers with variable track width, single-axle version

The unique Schuitemaker variable track width Variospoor is characterised by the possibility to widen the track during work, allowing the wheels to electrically/hydraulically extend up to 80 cm on either side, to widen the track from 190 cm (on the road) up to 350 cm (on the land).

Characteristics of the "standard" Robusta Vario 116 & 130
    • Börger pump FL 1036 industrial model
    • 8 settings reduction gear unit with remote control via hydraulic cylinder connected to folding injector
    • 3-point linkage + accumulator + hydraulic hoses + flow control valve.
    • Vredo cutting filter FT 4100 – vertically mounted, including add-on
    • Electric-hydraulic controls.
    • Electric discharge level indicator
    • 8” swivelling suction arm
    • Michelin 1050/50 R32 MegaXbib 178 AB tyres
    • 8" vertical shut-off valve between tank and body
    • 6” pressure pipe on mudguard
    • 6” three-way valve, hydraulically controlled

Technical data

Type		Robusta 116	Robusta 130
Capacity	ltr	11.600	13.000
Body diameter	cm	180	190
Body length	cm	450
Tyre size	(hxb)	187x108
Track width retracted	cm	190
Track width extended	cm	350

 

The Robusta slurry tankers with variable track width, tandem axle version

The unique Schuitemaker variable track width Variospoor is characterised by the possibility to widen the track during work, allowing the wheels to electrically/hydraulically extend up to 80 cm on either side, to widen the track from 190 cm (on the road) up to 350 cm (on the land).

Characteristics of the "standard" Robusta Vario 220 tandem
    • Soil-friendly machine with large capacity (22,000 litres)
    • Offset wheel placement
    • Extremely soil-friendly machine thanks to front variable axle and rear wheels placed close together.
    • The custom-designed attachment to the rear axle trestle makes the injector carefully follow the track without serving out.
    • Right to the end sufficient head pressure on the tractor through sophisticated tank form and hydraulic weight transfer.
    • Hydraulic sprung rear axle
    • Thanks to the compact construction a very favourable 12 m turning circle and a shortest turning circle of 8 m.
    • Easy manoeuvrable, both in drive and in reverse.
    • Forced and torsion-free steering with hydraulic cylinders.
    • Michelin 1050/50 R32 tyres.
    • Low ground pressure for each wheel thanks to optimal weight distribution when spreading manure, using a full 22,000-litre tank.
    • The whole combination is very stable, both on the land and on the road.
    • Pump drive via gearbox or the specific Schuitemaker variable drive.
    • Good access to the Börger pump
    • 8” swivelling suction arm for both suction and pumping over.
    • Electric-hydraulic controls; the Robusta 220 Vario Tandem has a 100-litre block with load sensing.

Technical data

Type		Robusta 220
Capacity	ltr	22.000
Body diameter	cm	230
Body length	cm	600
Tyre size	(hxb)	187x108
Wheel track of rear axle	cm	143
Track width front axle retracted	cm	190
Track width front axle extended	cm	350

 
The Robusta 260 Tridem (3 axles) slurry tankers and the 340 Quattro (4 axles)

The Schuitemaker Robusta 260 Tridem and the 340 Quattro are very efficient to use thanks to their large capacities and short filling times. A fully equipped Robusta 260 Tridem or 340 Quattro may also be fitted with a weighing device and an automatic sample-taking cabinet.

Characteristics of the "standard” Robusta 260 Tridem and 340 Quattro
    • Great driving comfort, even at higher speeds
    • Very small turning radius; forced steering of all 3 or 4 parabolic sprung axles
    • Börger pump FL 1036 industrial model
    • Vredo cutting filter FT 4100 including add-ons
    • 3-point hoisting device including power distribution valve
    • 8” swivelling suction arm for loading and unloading
    • LH 1200 manure measuring computer
    • Variable tyre pressure system with 3 suction compressors
    • Hydraulic braking on 6 or 8 wheels
    • Detachable tank
    • Electric-hydraulic manifold block with various functions

Technical data

Type		260 Tridem	340 Quattro
Capacity	ltr	26.200	34.200
Load bearing capacity	kg	48.000	64.000
Body diameter	cm	230
Body length	cm	600	780

The Robusta 250, suitable for hook arm system, type Kameleon

Especially designed by Schuitemaker for the Kameleon hook arm system is a Robusta pump tank that can be mounted or dismounted in only a few minutes.

Steps to be taken to dismount the tank without affecting the shallow grassland injector or farmland injector. These steps are to be taken in reversed order for the mounting of the tank.
1. Uncouple the PTO from the slurry pump
2. Remove the hydraulic hoses (compressed air and return) and connect to the coupling block of the chassis
3. Remove two multi-current plugs
4. Turn the dismounting support down in one tilting move to make sufficient ground clearance for the built-on injector

Characteristics of the "standard” Robusta 250
    • Approx. 24,600 litres tank capacity
    • Börger pump FL 1036 industrial model
    • 8” swivelling suction arm for loading and unloading
    • 6” suction opening with snap-on coupling at left and right side
    • Level indicator with extra sightglass
    • Vredo cutting filter FT 4100 including add-ons
    • 3-point linkage facility built onto the tank, including power distribution valve.
    • Variator drive with LH-5000 monitor